eCase Investigations - User Manual

  • Updated on Feb 2, 2026
  • Published on Jan 29, 2026
  • 50 minute(s) read
Prev Next

Using This Manual

The following formatting conventions are used in this manual to highlight important information:

  • Italicized text indicates a location, for example, a particular Folder, Tab, or Window.

  • Bold text indicates a specific user action, such as clicking a button.

Acronyms

All acronyms used in this document are defined in the following table:

Acronym

Definition

AD

Active Directory

AIGI

Assistant Inspector General for Investigations

ASAC

Assistant Special Agent in Charge

CO

Contract Officer

CS

Contract Specialist

DIG

Deputy Inspector General

IR

Internal Reviewer

O/IB

Outreach/Integrity Briefing

SAM

System of Award Management

SAC

Special Agent in Charge

SSN

Social Security Number

SSO

Single Sign On

1 eCASE Investigations Introduction

Consult the subsections below for introductory information about how to use eCASE Investigations.

1.1 About eCASE Investigations

eCASE Investigations is a centralized system that eliminates physical case files and implements a completely paperless complaint process. It reduces the costs associated with managing, storing, and destroying paper contract files. eCASE Investigations enforces internal security measures and maintains audit trails that track access to cases and attachments.

The purpose of this manual is to introduce you to the eCASE Investigations application, including all major functionalities and processes, to gain familiarity with the software and integrate it effectively into daily activities.

1.2 Sign In to eCASE Investigations

eCASE Investigations is accessible via a web browser (Edge or Chrome). To access

Investigations, navigate to the eCASE Investigations application via the link provided by your Administrator. Enter your (1) Username and (2) Password in the Login screen and click (3) Sign In.

NOTE: If your organization utilizes a PIV card, AD, or if LDAP authentication is enabled, you may not be required to enter your login credentials to sign in to eCASE Investigations.

1.3 Investigations Home Screen

The Home Screen and Dashboard appear after you log in to the application. The exact Home Screen configuration that appears is determined by your permissions level and Role, however most users see a page like the following example:

Within the Home Screen, you see the following eCASE features:

  • (1) Application Title: Clicking the title returns you to the Home Screen from any page in the application.

  • (2) Quick Search bar: You can perform quick searches on cases and documents using a word search or an attribute search.

  • (3) Dashboard: Where you perform most of your work.  

  • (4) Launch Pad: Options to create new cases, search cases, view your inbox, manage and create indexes, generate reports, and application administration.

1.3.1 Inbox

The Inbox displays the list of tasks currently assigned to you. Additionally, it displays the case number, case type, office, task assigned date, task due date, task name, and case status.

NOTE: You can also access the Inbox by selecting Inbox within the Launch Pad.

1.3.2 Inbox Widget

The Inbox widget displays a short breakdown of user-specific task information. Preconfigured categories include the total tasks in inbox, tasks arrived today, tasks due today, tasks overdue, tasks in office queue, and FYI copies.

NOTE: Hotline staff do not have access to this widget.

1.3.3 Office and Pending Folders

The Office widget displays the total tasks created by your office and cases that are assigned to your office. The Pending Folders by Office widget stores cases that are pending and have not yet been opened.  

NOTE: Hotline staff do not have access to the Office and Pending Folders widgets.

1.3.4 Folders I Own Widget

The Folders I Own widget displays your assigned cases, cases created by you but not yet started, cases that you created, and cases with staff.

NOTE: Hotline staff do not have access to the Folders I Own widget.

1.4 User Profile

Your User Profile allows you to customize preferences or sign out of eCASE. The Preferences menu allows users to manage their favorites, change passwords, and perform limited user customization. You can access your user profile from the Navigation bar. After clicking your user profile, the menu expands to show the Preferences and Sign Out options as shown below:

Click the buttons under your user profile to navigate directly to that user profile feature:

  • Preferences: Manage user preferences, including general preferences, manage favorites, folder options, out of office assistant, Home Screen widgets, and password management.

  • Sign Out: You can click this to Sign out of eCASE.

NOTE: For instructions on how to manage your Preferences, consult the eCASE User Manual, available within the Help menu:

1.4.1 Change Password

You can change your eCASE password at any time via the Preferences page. To change your password:

  1. Click your user profile from the Navigation bar, and select Preferences. The Preferences page appears.

  2. Click General to expand the User Preference Options in this menu.  

  1. Click Change Password. The Change Password pop-up window appears.

  1. Enter the current password in the Old Password field.  

  2. Enter the new password in the New Password field and in the Confirm New Password field.  

NOTE: The New Password value entered in these fields replaces the current password value.

  1. Click Save to save the new password, or Close to cancel and return to the Preferences screen.  

1.4.2 Manage Favorites

eCASE allows you to add specific Folders, Contacts, Search Criteria, Report Criteria, and Send Mail as links under Manage Favorites (as well as under the My Action Items field on the eCASE Home Screen), enabling quick access to frequently needed information.

NOTE: The My Action Items filed must be enabled in the dashboard.

To access the Favorites menu options, click your User Profile in the Navigation bar, then click Preferences > General > Manage Favorites.

The Favorites screen appears, as shown below:

The Favorites list features several attribute columns, which are described in the table below:

Column

Description

Select

Select a checkbox in this column to select a favorite and take further action.

Display Name

The chosen display name for the Favorite item.

Created Date

The date the Favorite was created.

Expiration Date

The expiration date set for the Favorite, if applicable.

Active

This column indicates if the Favorite item is currently active.

Application

The favorite’s associated application type.

Move Up/Down

Click the buttons in this column to rearrange the order in which the favorites appear.

Additionally, actions are available on this page as described below:

Action

Button

Description

Add New Favorite

Create a new Favorite item to add to the list.

Edit

Edit the selected Favorite.

Import

Import a Favorite XML file into eCASE.

Export

Export Favorite(s) as an XML file.

Delete

Delete the selected Favorite from the list.

Share

Share the selected Favorite with another user.

Back

Return to the previous screen.

Select Group

Using the drop-down list, you can select a Favorite group to display only the favorite items associated with that Favorite group. This section also allows you to Edit, Delete, and create New Favorite groups, using the adjacent buttons

2 eCASE Investigations Lifecycle

The eCASE Investigations lifecycle typically begins with a complaint. A Complaint case can be filed by hotline users from within the Investigation Portal or created by OIG Complaint Intake Staff directly within eCASE itself. The following sections detail the lifecycle of a case, from complaint creation to completion or conversion to another case type.

2.1 eCASE Investigation Portal

The eCASE Investigation portal is used to ingest submitted complaints from public users. If complaints are submitted via the portal, then the subsequent cases are available for OIG staff to open and process in eCASE Investigations.  

To submit a complaint via the portal, users must complete the captcha and click Submit. After passing the captcha, portal users see the following window:

After reading the guidance material, if users are submitting a complaint based on the last question’s parameters, they must click Yes to progress to the Your Information page. Users must answer the confidentiality questions and complete the contact information prior to proceeding to the next window.  

NOTE: eCASE secures all contact information fields if the user answers Yes to the Do you want to be anonymous question.

After completing the contact information, click Next. The Alleged Subject Information page appears, and the user must complete all required fields. Users are required to select an Entity Type (Alleged Subject), enter a name, and if possible, provide/verify an address. After providing the required information, click Next.

The Allegation Information page appears, and the user must enter a description of the allegation within the Allegation Description field. Users can attach and submit supporting documents by clicking the Add/View Attachments button. After sufficient content has been added, click Submit. A confirmation page appears, with the option to return to the agency’s website using the Home button. The information is submitted to eCASE Investigations and prompts Complaint Intake Staff members to process the complaint.

2.2 Complaint Case

Complaint cases are the first case type in the Investigations lifecycle. These can be submitted to eCASE via the portal. Alternatively, they can be created by eCASE agents/users by clicking New from the launch pad and selecting Complaint.

After the complaint moves through the complaint workflow, it can be converted to a Preliminary Case, converted to an Investigation, or closed.

2.2.1 Initialize a Complaint

After a complaint has been initialized, you must complete the Case Details form. After the required information has been completed, the case can be saved, and the Complaint can begin it workflow. To initialize a complaint:

  1. Within the Launch Pad, click Main Menu, then click the New drop-down list and select Complaint. The New Case window appears.  

  1. Enter a title for the case in the Title field.

NOTE: Required fields are indicated by a red border and/or an asterisk.

  1. Enter the allegation information in the Initial Allegation Synopsis field.

  2. Enter a description of the case in the Case Summary field.

NOTE: eCASE auto populates the Date Initiated and the Date Due fields based on configurations.

  1. Select the date the allegation was received using the Date Allegation Received date picker.  

  2. Click the checkbox(es) next to whichever Case Attributes apply to the new case.  

  3. Select Yes or No from the Initiated from Outreach drop-down list.  

a. If Yes was selected in the field above, the Outreach Type drop-down list appears. Select a value from the list.  

  1. Click the State(s) lookup. The Select Item pop-up window appears.

  2. Click the checkbox next to the state and click OK. The pop-up window closes and the selected value appears in the State field.  

  1. Clicking the Agency lookup. The Select Item pop-up window appears.

  2. Click the checkbox next to the agency and then click OK.  

NOTE: When configured, if Other is selected for the Agency field, an additional free text field, Other Agency, appears for you to input the agency name.

  1. The pop-up window closes and the selected value appears in the Agency field.  

  2. Select the impacted programs within the Impacted Programs field by clicking the Select Agency icon.  

NOTE: The impacted programs listed here correspond with the selected agency, meaning the selections available in this field are dependent upon the selection made in the Agency field.

  1. If configured, you will also be prompted to fill out the agency’s Division, City, and County.

  2. Fill out the External Complaint Tracking Number.

  3. Select a Complaint Method from the Complaint Method drop-down list.

  4. Select an Investigative Case Type from the Investigative Case Type drop-down list.

  5. Click the Focus Areas lookup. The Select Item pop-up window appears.  

  1. Click the checkbox next to the value, and then click OK. The pop-up window closes and the selected value appears in the field.  

NOTE: You cannot alter the Status field. The status of the case changes automatically as the case moves through the workflow.

  1. If prompted, select a Complaint Source from the Complaint Source drop-down list.

  2. If prompted, use the Allegation Types lookup. The Select Item pop-up window appears.

  1. Click the checkbox next to the value, and then click OK. The pop-up window closes and the selected value appears in the field.  

  2. Select a priority number from the Case Priority drop-down list. 1 is the highest priority.

  3. Select the alleged violation from the Primary Alleged Violation drop-down list.  

  4. If required, select the Secondary Alleged Violation from the Secondary Alleged Violation drop-down list.  

  5. Click Save on the toolbar to save and create the complaint.

 

NOTE: There may be additional fields present on the Case Details form that are not outlined above or fields that are described, but not shown on the form. This is due to the case type configuration settings. Individual customer configuration may vary.

2.2.2 Add Indexes to a Complaint

To progress the case forward, the case must reach Open status. In order to reach Open status, at least one index must be added to the complaint. To add indexes to a complaint:

  1. Open the Complaint folder, and within the Complaint tab, click Indexes.

  1. If an index has already been added to the case file, it appears beneath the Indexes button. If no index has been added, or you want to add an additional index, click Add New.

  1. The page refreshes to display a new blank row in the Indexes subsection. Click the Index lookup. The Search for Index pop-up window appears. Here, you can search for existing Indexes by performing a manual search or using existing Search Criteria. Alternatively, you also can create and select a new index by clicking the New button in the tool bar.

  1. Enter any available index information into the search fields and/or click Search. The popup window refreshes to display a list of indexes that match the search criteria.  

NOTE: Clicking Search without entering search criteria returns a list of all indexes in the application.

  1. Select an index from the search results and click Select. The pop-up window closes and the selected Index appears in the field.

  1. Click the Relationship lookup. A pop-up window appears.  

  2. Click the radio button next to the entry and click OK.  

  1. The pop-up window closes and the selection appears in the Relationship field.  

  2. If required, click the Confidential checkbox to designate the index as confidential.

  3. Select a value from the Aware of Investigation drop-down list.

  4. Click the Offense lookup. The page refreshes to display a list of Offenses.

  1. Click the checkbox next to the Offense, and then click Select.  

  1. The page refreshes and the selected Offense appears in the Offense column.

  2. Click the Substantiated Offense lookup. The page refreshes to display a list of Substantiated Offenses.

  1. Click the checkbox next to the Substantiated Offense, then click Select.

  1. Click Save on the case folder toolbar to save the added Index(es) and the case folder.

  1. A confirmation window appears. Click OK.  

  2. If necessary, click the Add Attachments button to add attachments to the Index.  

  1. After an index has been added to the case file, the complaint can move to Open status. Click the now enabled Open Complaint button to initiate the case opening.  

  1. A verification message appears with a message that is dependent upon your organizations approval process for opening a complaint. The complaint is either opened or assigned to a role/user to approve the opening. Click OK.

2.2.3 Open a Complaint from the Hotline Portal

Opening a complaint received from the Hotline Portal varies slightly from opening a complaint created within eCASE. The main differences are described below. Hotline intake users typically have a hotline dashboard that displays all the complaints submitted through the portal. The steps below outline opening a complaint from the portal.

  1. From the Home Screen, open a hotline portal complaint from the Office/Inbox queue. It will have the status of Submit to Open.

  2. The Case Details form appears. Complete the required fields and any additional information.  

  3. Click Save on the case folder toolbar.

  4. Click Indexes to add/edit indexes related to the case.

NOTE: Complaints submitted through the hotline portal will have auto-populated indexes based on the information provided within the portal. If provided, a Complainant index will be added using information from the Your Information page of the portal. A Subject index will be added using the information provided on the Alleged Subject Information page.

  1. After all necessary information is added/updated, click the Open Complaint button.

  2. A verification message appears with a message that depends on the approval process for opening a complaint. The complaint will either be opened or assigned to a role/user to approve the opening. Click OK.

  3. The complaint will either be opened or submitted to a role/user for approval, depending upon the organizational workflow.  

2.2.4 Process a Complaint

After a complaint has reached Open status, staff can process the complaint by completing actions such as: delegating tasks to operation agents, adding attachments/documents, and assigning the case to another office, etc. Additionally, staff can continue the complaint/case lifecycle by converting the case to a Preliminary Investigation (Request Conversion to P), converting a case to an Investigation Case (Request Conversion to I), or closing the complaint case.

  • The Request Conversion to P (Preliminary) button allows you to create a Preliminary case containing all the complaint information and documentation transferred from the initial complaint. The new Preliminary case maintains the same case number as the originating complaint; however, it also includes an additional identifying code. In the Related Cases tab, you can see the new Preliminary case number that is created.

  • The Request Conversion to I (Investigation) button allows you to create an Investigation case containing all the complaint information and documentation transferred from the initial complaint. Investigation cases created in this fashion maintain the Complaint’s Case Number, with an additional identifying number added. After clicking this button, you can navigate to the Related Cases tab, where you can see the new Investigation case number that is created.

  • The Request to Grant Extension button allows you to request an extension for a case. You must submit extension comments to request an extension.

  • The Assign to Office button allows you to change the initial office of a complaint to another office.

2.2.5 Close a Complaint

A Complaint case can be closed by completing the Case Closing Checklist (within the Close tab), or by converting the case into either a Preliminary case or an Investigation case.

A Complaint case folder features a Close tab, which is used track final closing information, the Reasons for Closing, or the Case Closing Comments. You enter their final disposition within the fields in this tab and the drop-down lists within this tab can be configured by administrators to meet the dispositions language of any organization. Additionally, you can also add comments expanding upon the reasoning behind the disposition.

To complete the Close tab of a complaint:

  1. Open the Complaint case folder and navigate to the Close tab. Select a reason for closing from the Reason for Closing drop-down list.

  2. Click the Management Challenges lookup. The Select Item pop up window appears.  

  1. Select one or more Management Challenges and click OK. The pop-up window closes and the selected Management Challenges appear in the field.

  2. Enter any case closing comments in the Case Closing Comments field.

  3. Answer the Yes/No/NA questions within the Case Closing Checklist.  

NOTE: Attachments can be added to support the responses for each checklist question.

  1. Click Save to save the case closing information.

  2. Click Close Folder to close the complaint or start the approval process for closing. The Closed Date field is automatically populated.  

  1. The page refreshes, and the case is routed to the approvers responsible for approving case closure.  

2.2.6 Convert a Complaint

Converting a Complaint case folder to either a Preliminary or Investigation case folder automatically closes the current complaint case. A conversion request is sent to an approver and all the case information (including attachments and logs) is transferred to the new case. On the Case Details form (Complaint tab), there are two buttons for the user/agent can click to start the conversion process to a Preliminary Investigation or Investigation: Request Conversion to P and Request Conversion to I. The complaint must be in an Open status to start the conversion.

2.3 Preliminary Case

A Preliminary case is created directly by authorized staff or by converting a complaint and is used to prepare for an Investigation case.

2.3.1 Initialize a Preliminary

Preliminary and Complaint Cases share many of the same fields, especially if the Preliminary case is converted from a complaint, which means the Preliminary case inherits all the information from the previous case.

2.3.2 Open a Preliminary

If the Preliminary case was created by conversion from a Complaint case, the Case Status is Open, and all data from the complaint is duplicated within the Preliminary case. To start a new Preliminary Case:

  1. Within the Launch Pad, click Main Menu, then click the New drop-down list and select Preliminary. The page refreshes to display a new blank Preliminary case folder.  

  2. Enter a title for the case in the Title field.

NOTE: Required fields are indicated by an asterisk (*).

  1. Enter the submitted allegation information in the Initial Allegation Synopsis field.

  2. Enter a description of the case in the Case Summary field.

NOTE: eCASE auto populates the Date Initiated and the Date Due fields.

  1. Select the date the allegation was received using the Date Allegation Received date picker.  

  2. Click the checkbox(es) next to whichever Case Attributes apply to the new case.  

  3. Select Yes or No from the Initiated from Outreach drop-down list.  

a. If Yes was selected, the Outreach Type drop-down list appears. Select a value from the drop-down list.  

  1. Click the State(s) lookup. The Select Item pop-up window appears.

  2. Click the checkbox next to the value and click OK.

  3. The pop-up window closes and the selected values appear in the State(s) field.  

  4. Click the Agency lookup. The Select Item pop-up window appears.  

  5. Click the checkbox next to the value and click OK.

  6. The pop-up window closes and the selected values appear in the Agency field.  

  7. Click the Impacted Programs lookup.  

  1. The page refreshes to display a list of selectable values. Click the checkboxes next to the programs and click Select.  

  1. The page refreshes and the selected value(s) appears in the Impacted Programs field. Select a complaint method from the Complaint Method drop-down list.

  2. Select a case type from the Investigative Case Type drop-down list.

  3. Click the Focus Areas lookup. The Select Item pop-up window appears.  

  4. Click the checkbox next to the Focus Area and click OK.

  1. The pop-up window closes and the selected value appears in the Focus Areas field.

  2. Select a complaint source from the Complaint Source drop-down list.

  1. Select a priority number from the Case Priority drop-down list.  

NOTE: When selecting a priority number, the number 1 is the highest priority.

  1. Click the Primary Alleged Violation lookup. The Select Item pop-up window appears.  

  2. Click the checkboxes next to the value and click OK.  

  1. The pop-up window closes and the selected value appears in the field.  

  2. If necessary, click the Secondary Alleged Violation lookup. The Select Item pop-up window appears.

  3. Click the checkboxes next to the value and click OK.  

  1. The pop-up window closes and the selected value appears in the field.

  2. Click Save to create the Preliminary case.  

NOTE: There may be additional fields present on the Case Details form that are not outlined above or fields that are described above that are not shown on the form. Complete as many fields as possible prior to saving the case folder.

2.3.3 Process a Preliminary

Processing a Preliminary case is like processing a complaint. Many of the fields and tabs are the same, however, a Preliminary case may feature additional tabs that are not included in a Complaint case folder, such as Case Review.

2.3.3.1 Preliminary Investigation

The title of the case form is now Preliminary Investigation, and the case form no longer features the Request Conversion to P button. You can submit an Index to the case form in the same manner as adding an Index to a Complaint.

NOTE: A Preliminary case can only convert to an Investigation. It cannot be converted back to a Complaint.

2.3.4 Close a Preliminary

As mentioned above, a Preliminary case can be closed by submitting a request in the Close tab or by converting the case into an Investigation case.

The Close tab in a Preliminary case is like a Complaint, but it requires closing approval by default. Closing approval is configured by the Administrator and subject to organizational requirements. You must complete the Case Closing Checklist prior to submitting the Close Request.

2.3.5 Convert a Preliminary

Converting a Preliminary case automatically closes the current case. A conversion request is sent to the approver and all the case information (including attachments and logs) is transferred to the new case. In the Case Details subsection (Preliminary Investigation tab), there is a button for the user/agent to start the conversion process to an investigation: Request Conversion to I. The preliminary investigation must be in an Open status to start the conversion.

2.4 Investigation Case

The Investigation case type is the final case type in the complaint lifecycle. Investigation cases can be processed and closed just like the other case types.

2.4.1 Initialize an Investigation

An Investigation case shares fields with the Preliminary and Complaint case types. If the case is converted from a Complaint or Preliminary case, it inherits all the information from the previous case. If the Investigation case is not converted from another case, you must complete the Date Investigation Opened field.

2.4.2 Open an Investigation

If the Investigation is converted from a Complaint or Preliminary case, the Case Status is

Open, and all data from the previous case is duplicated within the Investigation case. New Investigation case folders can also be created using the Launch Pad. To create a new Investigation Case via the Launch Pad:

  1. Click the New drop-down arrow within the launch pad, and select Investigation.  

  2. The page refreshes to display a new blank Investigation form. Enter a title for the Investigation in the Title field.

NOTE: Required fields are indicated by a red asterisk (*).

  1. Enter the submitted allegation information in the Initial Allegation Synopsis field.

  2. Enter a description of the case in the Case Summary field.

NOTE: eCASE auto populates the Date Initiated and the Date Due fields.

  1. Select the date the allegation was received using the Date Allegation Received date picker.  

  2. Click the checkbox(es) adjacent to any Case Attributes which apply to the new case.  

  3. Select Yes or No from the Initiated from Outreach drop-down list.  

a. If Yes was selected, the page refreshes and the Outreach Type drop-down list appears. Select a value from the drop-down list.  

  1. Click the State(s) lookup. The Select Item pop-up window appears.

  2. Click the checkbox next to the value and click OK.

  3. The pop-up window closes and the selected values appear in the State(s) field.  

  4. Click the Agency lookup. The Select Item pop-up window appears.  

  5. Click the checkbox next to the value and click OK.

  6. The pop-up window closes and the selected values appear in the Agency field.  

  7. Click the Impacted Programs lookup.

  1. The page refreshes to display a list of selectable values. Click the checkboxes next to the programs and click Select.  

  1. The page refreshes to display the full case form, with the selected values appearing in the Impacted Programs field. Select a complaint method from the Complaint Method dropdown list.

  2. Select a case type from the Investigative Case Type drop-down list.

  3. Click the Focus Areas lookup.

  1. The Select Item pop-up window appears. Click the checkbox next to the item and click OK.

  1. The pop-up window closes and the selected item appears in the field.

  2. Click the Primary Alleged Violation lookup. The Select Item pop-up window appears.  

  3. Click the checkboxes next to the value and click OK.  

  1. The pop-up window closes and the selected value appears in the field.  

  2. If necessary, click the Secondary Alleged Violation lookup. The Select Item pop-up window appears.

  3. Click the checkboxes next to the value and click OK.  

  1. The pop-up window closes and the selected value appears in the field.

  2. Click Save to create the Preliminary case.  

NOTE: There may be additional fields present on the Case Details form that are not outlined above or fields that are described, but not shown on the form. This is due to the case type configuration settings.

2.4.3 Process an Investigation

Processing an Investigation case is similar to processing a Complaint or Preliminary Investigation. Most of the fields and tabs are the same, however, an Investigation case may feature additional tabs based on  organizational needs and configuration.

2.4.4 Close an Investigation

An Investigation case can be closed through a two-step process. These steps are discussed in the subsections that follow.

2.4.4.1 Completing the Investigation

After the Investigation has been completed, the agent can navigate to the Close tab to start the closing process.

  1. Open the case folder and complete any required fields and information under the Investigation Complete section.

  2. Navigate to the Close tab and complete the Case Closing Checklist by selecting a value from each drop-down list in the Verification column, adding Comments, and/or uploading relevant attachments for each configured checklist question.

  1. Click Save.

  2. Click Investigation Complete.

The case status changes to Investigation Complete. Additionally, the user/lead agent can now submit the close request by navigating to the bottom of the Close tab and clicking Submit Close Request.

2.4.4.2 Submitting the Close Request

In order to submit a close request for an Investigation case, the case status must be

Investigation Complete. As the Lead Agent, navigate to the Close tab and click Submit Close Request. This starts the Closing Approval workflow. After the necessary approvals are completed, the Investigation case folder will be Closed.

2.5 Outreach/Integrity Briefings

eCASE Investigations allows you to create Outreach/Integrity Briefing (O/IB) cases and associate these with new or existing Complaints, Preliminaries, and Investigations. These provide a summary of interviews with subjects associated with investigations, and include associated attachments.

NOTE: Outreach and Integrity Briefing refer to the same form. Different organizations use different terminology, so both are reflected here.

2.5.1 Create an Outreach/Integrity Briefing

Follow the steps below to create an Outreach/Integrity Briefing case.

  1. From the Main Menu, click New > Outreach. The New Case screen appears, as shown below:

  1. Use the date picker to select the Date of Briefing.  

NOTE: Each interview should be captured in a unique O/IB form.

  1. Select a Region from the drop-down list.

  2. Click the Agent lookup. The Select Item pop-up window appears.  

  3. Click the checkbox next to the Agent and then click OK. The pop-up window closes and the selected Agent appears in the field.  

  4. Click the Country lookup. The Select Item pop-up window appears.  

  5. Click the checkbox next to the Country and then click OK. The pop-up window closes and the selected Country appears in the field.  

  6. Select the entity the outreach was provided to from the Provided To drop-down list.

  7. Enter Audience information in the Audience text field. Enter as much information as required, this is a free text field.

  8. Enter the number of interview attendees in the No. of Attendees field.

  9. Enter a Briefing Summary in the Briefing Summary field. This is a free text field.

  10. Select the Intelligence Type from the drop-down list.

  11. If applicable, enter an Intelligence Description in the field.

NOTE: Intelligence Description is not a required field.

  1. After all required fields are complete, click Save to save the new O/IB case.  

  2. A pop-up appears asking “Do you want to start the Workflow now?” Click OK to begin the workflow, or Cancel to postpone. Either selection prompts the newly saved Outreach case folder to appear.  

NOTE: After clicking Save, the Outreach case folder is assigned an Outreach #, and contains new Attachments and Assignment tabs.

The new O/IB case is now created and available for further actions, including Assigning and Linking to existing cases. See the Working with an Outreach/Integrity Briefing subsection for details on working with the O/IB.

2.5.2 Working with an Outreach/Integrity Briefing

After an O/IB is created, several actions are available. These are detailed in the following subsections.

2.5.2.1 Link Case

All O/IB cases are required to be linked to a new or existing Complaint, Preliminary, or Investigation case. This must be done manually and cannot be automatically completed by the application. Complete the steps below to link an O/IB with another case folder:

  1. Open an existing O/IB (or create a new one), then click the Assignments tab.

  1. Click Link Folders. The Search Folders pop-up window appears.

  1. Use the fields to create a search query to locate the existing case you want to link to the O/IB and then click Search.

  2. The pop-up window refreshes to display any matching Search Results. Select a Case then click Select.  

  1. A confirmation window appears. Click OK.

  2. The pop-up window closes, and the selected folder now appears in the Linked Folders subsection of the Assignments tab.  

2.5.2.2 Assign Task

The O/IB can be assigned as part of the workflow. This can be done during creation (the system automatically prompts to begin the workflow when creating a new O/IB), or manually from the Assignments tab. Follow the steps below to assign the task.

NOTE: If clicking Yes from the task initiation prompt, skip to step 3 below.

  1. Open an existing O/IB, then navigate to the Assignments tab.  

  2. From the Assignments tab, click Actions > Start.  

  1. After clicking Start, the Assign Task screen appears as shown below:

  1. Select a Task Name and User from the respective fields. These are required.

  2. After entering the required information, click Start to initiate the task.

  3. After clicking Start, the new assignment appears under the Assignments tab as shown below:

There are options to Complete, Complete & Create Task, and Delegate the task. See the eCASE User Manual for more information on assignment actions.

2.5.2.3 Attachments

You can add attachments to O/IB cases from the Outreach form, or from the Attachments tab. To add attachments from the Outreach form:

  1. Open an existing O/IB. The case opens to the Outreach tab.

  2. Click Attachments next to the No. of Attendees field.

  3. After clicking Attachments, the Case Attachments pop-up appears as shown below:

  1. Use the Action Buttons to add attachments to the O/IB case. These can be viewed and managed from the Attachments tab at any time.  

For more detail on using Attachments, see the eCASE User Manual.

2.5.2.4 Close Case

An O/IB case can be closed at any time. Follow the steps below to close an O/IB case.

  1. Open an existing O/IB case.  

  2. From the Actions bar, select Actions > Close. The Close Case screen appears as shown below:

  1. Verify the closure date in the Case Closed Date field.

  2. Optionally, use the Email Notification fields to send a notification for the closure.  

  1. When the date is confirmed and option or set up, click Close Case to commit the closure action.

  2. A pop-up confirmation appears:

  1. Click OK to dismiss the message and close the case, or Cancel to cancel the action.

  2. After clicking OK, the Outreach tab appears and reflects the Closed status.

3 Case Folder Types

For every case folder, there are additional tabs to insert and record data pertaining to the case. Each case type can have a specific arrangement of tabs based on the organization’s needs, configuration, and the case type itself. Additionally, when converting the case to a Preliminary Investigation or Investigation, all the information inputted will automatically be transferred over to the new case folder. Within this section, each possible tab will be described.

3.1 Chron Log

The Chron Log tab stores case activities and changes to the case, including status changes, a description of events, the agent involved, and the activity date. Additionally, authorized users can edit Chron Log Entries to reflect additional changes to the event or add supporting documentation to the Chron Log Entry.

NOTE: Chron Log Entries are auto-generated and can also be manually completed by authorized users.

The New Chron Log Entry subsection allows you to add new Chron Log Entries to the case. To add a new Chron Log Entry:

  1. Open the Complaint case folder and navigate to the Chron Log tab.  

  2. Inside the New Chron Log Entry section, select an activity date for the event by using the Activity Date picker.

  1. Select the agent who performed the event from the Agent drop-down list.

  2. Select a category for the event from the Category drop-down list.

  3. Enter a description for the event in the Description field, if applicable.

  4. Click the Is Grand Jury checkbox to apply the Grand Jury case attribute to the Chron Log Entry.  

  5. Click the save icon to save the Chron Log Event.  

  1. The page refreshes and the new entry appears in the Edit Chron Log Entries subsection.  

NOTE: An attachment can be added to a Chron Log Entry after it has been saved.

The Edit Chron Log Entries subsection allows authorized users to edit existing Chron Log Entries. All fields can be edited except for the Chron Category. Attachments can be added within this section by clicking the Attachments link. Click the Red X icon to delete the Chron Log Entry.

3.2 Techniques

The Techniques tab stores the actions/activities that were performed by agents while processing the case. These technique items are not generated by the system but instead must be added by you or other authorized staff. Techniques are automatically added as Chron Log entries.

To add a new technique:

  1. Within the blank technique row, select the date by using the Date picker.

  2. Click the Staff lookup to select the staff that performed the technique.  

a. Additional staff members can be added within the Staff tab.

  1. The page refreshes to display the Techniques subsection. Click the checkbox next to the staff role, and then click Select.  

  1. The page refreshes to display the full Techniques tab, and the selected user role appears in the Staff column. Click the Type lookup. The Select a Value pop-up window appears.  

  1. Select a value from the list and click OK. The pop-up window closes, the page refreshes, and the selected value appears in the Type field.  

  2. Enter any comments regarding the technique within the Comments field.  

NOTE: The Comments field is limited to 200 characters. An attachment can be added to a Technique entry after it has been saved.

  1. Click Add Technique. The page refreshes and the Technique is saved and appears in the Techniques subsection.  

3.3 Refer to Others

The Refer To Others tab allows you to refer the case to another agency.

To create a new case referral:

  1. Open the case folder and click the Refer To Others tab.  

  2. Click Insert Case Referral. The tab refreshes and a new Referral row appears, with all fields blank.

  1. Select the date referred from Date Referred date picker.

  2. Select the agency that this case is referred to from the Referred To drop-down list.

  3. Select the date the response is due using the Date Response Due date.

  4. Select the date the response was received using the Date Response Received date picker.

  5. Select the date the referral was closed using the Date Referral Closed date picker.

  6. Select the status of the referral from the Status of Referral drop-down list.

  7. Enter any relevant Comments in the Comments field.  

  8. Click Save. The page refreshes and the Case Referral is saved.  

NOTE: An attachment can be added to a Referral after it has been saved.

3.4 Case Review

The Case Review tab is featured within the Preliminary and Investigation case types. Authorized users can add a Case Review to the form after the review is completed, and this review serves as the justification for closing or conversion to Investigation. To complete a case review:

  1. Click the Case Review tab.

  2. Click Insert Case Review.

  1. The page refreshes to display new empty Case Review fields. The Date Submitted field automatically populates. If necessary, select a date from Date Submitted date picker.

NOTE: The Reviewed By field automatically populates and reflects who is tasked to approve or reject the case review.  The Status field automatically generates and is updated as the review progresses.  The Date Approved field cannot be altered and is later updated with the date the case review is approved.  The Report Period cannot be altered and displays the due date for the case review.

  1. Click the Media Attention checkbox if the case has received media attention.

  2. Enter a Case Review Synopsis within the Review Synopsis field.  

NOTE: Staff should update the review synopsis before proceeding. It is not a required field, but it is recommended to update the field information before proceeding.

  1. Enter the Agent Objectives within the Agent Objectives field.  

NOTE: The Case Manager Guidance field is only available for the approver/reviewer to update after this case review is submitted for review.

  1. Click Save.  

  2. The screen refreshes and displays additional options.  

  3. Click Submit to Approval to submit the Case Review to the reviewer.  

  4. A pop-up window appears, indicating the Case Review entry was successfully submitted for approval. The approver must review the information and input the case manager guidance. After, they can approve or disapprove the request.  

3.5 Referral Results

The Referral Results tab is used to record conclusions from referred indexes. The tab lists each index in a grid structure, and any referral results logged for that index are displayed in a button in the corresponding row and the number of referral results are indicated in parentheses within the button. There are five types of referral results that can be logged under an index: Administrative, Civil, Criminal, Suspension/Debarment, and Asset Forfeiture.

NOTE: Within the grid, indexes with at least one result logged under a type appear in light blue. The total number of results appears in parentheses next to the type. Dark blue items denote those without any results logged.

To view existing results or add new results under a type, click that item next to the index. If any results exist, these are listed. Otherwise, you are given the option to add a new results, for example, using the Insert Administrative Referral button below:

The following subsections provide steps for adding referral results under each available referral type.

3.5.1 Administrative

Each Administrative Referral includes both the Administrative Referral as well as a Monetary Result. Each Referral logged should also include a Monetary Result. This section walks through creating both.  

To create a new Administrative Referral, follow the steps below:

  1. Within an Investigation folder, click the Referral Results tab, locate an entity row where you want to record the referral and click the adjacent Administrative button:

  1. Click Insert Administrative Referral.

  1. The page refreshes to display additional fields. Use the date picker to select the Referral Date.

  2. Click the Referred To lookup. The Select Item pop-up window appears.  

  1. Click the radio button next to the entry, and then click OK. The pop-up window closes and the selected value appears in the Referred To field.  

  2. Click Save to save the date and agency.  

  1. The screen refreshes to show the newly added Referral Result, which now includes an Add Attachments button, a button to add Results, and the X button which is used to delete the referral.

  1. To add Result Information, click Results. The screen refreshes to show the new Monetary Result form, as shown below, as well as the Insert Administrative Results button.

  1. Click Insert Administrative Results. The page refreshes to display additional fields.

  2. Select the Result Date using the date picker.

 

  1. Click the Result lookup button. A pop-up window appears.

  2. Select the radio button next to the agency, and then click OK.  

  1. The pop-up window closes and the selected agency appears in the field.

  2. After all results are added, click the Save Data button at the top of the form to save the data.

  3. Next, you must add the Monetary Result information to the Referral.  

  4. The page refreshes to display the Monetary Result workspace. Enter the Amount value in each row that requires a monetary result to be added.  

  1. Use the date picker to select the date in each row that requires a monetary result.  

  2. When all data is entered in the form, click Save Data to save the monetary result.

  1. The page refreshes and the results are now saved. Click Return to Administrative View to return to the results listing.

3.5.2 Civil

Within a Civil Referral there are three subsections: Civil Presentation, Civil Results and Monetary Results. To create a new Civil Referral, follow the steps below:

  1. From an Investigation folder, click the Referral Results tab, then locate an entity to receive the referral and click the corresponding Civil button.

  2. The page refreshes to display any previously created Civil referrals. Click Insert Civil Presentation to add a new Civil Presentation.

  1. The screen refreshes again to display new fields for capturing the Civil Presentation. Additionally, there are areas for capturing Civil Results and Monetary Results. First, complete the required fields within the Civil Presentation subsection.

  1. Select the Date Presented using the date picker.

  2. Click the Attorney Type lookup.  

  1. The Select Item pop-up window appears. Click the radio button next to the entry, and then click OK.  

  1. The pop-up window closes, and the selected entry appears in the field. If applicable, complete the Referral Type, Attorney Name, District, Date Filed/Amended, and other fields.

  2. Click Save.

  3. To add Civil Results, click the green Plus sign in the appropriate section of the form:

  1. The page refreshes and additional fields appear for capturing the Civil Results information. Complete these fields, if applicable, and then click Save to save the information.

  2. To capture Monetary Results, click the Click here to Add/View/Update Monetary Results button.  

  1. The screen refreshes to show fields for capturing Monetary Result information. Enter as much information as possible in the fields provided for capturing Amount and Date.

  1. When all data is entered in the form, click Save Monetary Data to save the monetary result.

  1. When complete, click Return to Civil View to return to the Civil referral screen.

3.5.3 Criminal

Each Criminal referral in this section contains five subsections: Criminal Presentation, Arrest Details, Outcome, Sentencing, and Monetary Results. To create a new Criminal Referral, follow the steps below:

  1. Open an Investigation folder and navigate to the Referral Results tab. Locate the entity to receive the referral and click the adjacent Criminal button:

  1. The page refreshes to display the expanded Criminal Referral workspace. Click Insert Criminal Record to add a new entry.

  1. The screen refreshes to show additional fields within the Criminal Presentation subsection, as shown below. Additionally, there are spaces to capture the Arrest Details, Outcome, Sentencing, and Monetary Results. Complete these fields, if possible.  

  1. Click the Attorney Type lookup.

  1. The Select Item pop-up window appears. Click the radio button next to the selection, and then click OK.

 

  1. After all fields are complete, click Save to save the details.

  2. Next, you must add Arrest Details information. Click the green + on the Attest Details line to expand the fields:

  1. The page refreshes to display additional fields used for capturing the Arrest Details. Complete as many fields as possible and then click Save to save data entered in these fields.

  1. Click the + to expand the Outcome fields, as shown below:

  1. The page refreshes to display additional fields. Complete as many fields as possible, then click Save to save the Outcome details.

  1. To capture Monetary Results, click Click here to Add/View/Update Monetary Results.  

  2. The screen refreshes to display additional fields for capturing Monetary Result information. Provide as much detail as possible in the fields provided. Fields exist for different types of monetary results, including dates and amounts.  

  1. Click Save Monetary Data to save the monetary result information.

3.5.4 Suspension/Debarment

Follow the steps below to log a Suspension/Debarment Referral.

  1. Open an Investigation folder and navigate to the Referral Results tab.  

  2. Locate an entity to receive the referral and click the adjacent Suspension/Debarment button.

  1. The page refreshes to display the Suspension/Debarment Referral Results workspace. Click the Insert Debarment Referral button.

  1. The page refreshes to display additional fields for capturing the Suspension/Debarment Referral, as shown below:

  1. Complete the fields to capture details on the Suspension/Debarment Referral Results.  

  2. When complete, click Save to record the changes.

  3. After all referrals are complete, click Return to Referral Results to return to the previous screen.  

3.6 Attachments

3.6.1 About the Investigations Attachments Tab

The Attachments tab allows you to add attachments and child attachments to a case, as well as manage these attachments using the Check Out/In, Send To, and OCR Document functions. Attachments across the case folder are stored within this tab and are sorted by Attachment Type and Document Type.

The Add From drop-down list is the primary method in which new attachments can be added to a case. You must select the attachment type, document type, description, etc. to add an attachment. The Add From drop-down list allows you to add attachments to the case from the following locations:

  • My Computer: Add an attachment from the local desktop.

  • Default Attachments: Add an attachment from the default attachments, if configured.

  • Case: Add an attachment from an existing case. eCASE opens the Search Case Documents window, allowing you to search for and select any existing case documents.  

3.6.2 Adding Attachments

The fields described below are only available within the Add From > My Computer option, which is the most frequently used attachment source. They include:

  • Case Number: This field is auto populated and inherited from the current case.

  • File(s) to be Attached: The Select button allows you to select the attachment(s) from a local computer.

NOTE: Required fields are indicated by a red asterisk (*).

  • Attachment Name: You can enter an alternative name for the attachment into the Attachment Name field, which replaces the original file name within eCASE.

  • Prepare for Review: Select Yes to automatically assign the attachment to the designated user for review. Selecting Yes in this field prompts additional fields to appear. You can click the Assigned To lookup to designate the user to assign this review.  

  • Attachment Type: Select the attachment type from the Attachment Type drop-down list.

  • Document Type: Select the document type of the attachment from the Document Type drop-down list.

  • Title: Enter a title for the attachment. This field will overwrite the existing document title upon upload.  

  • Description: Enter a description of the attachments within the Description field.

  • Date Uploaded: This field is auto generated and uses the current date, however it can be altered via the date picker.

  • Prepared By: This field is auto generated and displays the current user who is adding the attachment.

  • Status: This field displays the current status of the document. Some attachments require approval prior to uploading, (via the Submit for Review and Resubmit buttons). It displays the Approval Not Required status if there are no approval requirements for the attachment, otherwise it displays Submit for Approval.  

  • Status Date: Select the status change date of the attachment by using the Status Date picker.

  • Status By: This field is automatically generated and displays the user who approved/rejected the attachment.

  • Rejection Reason: If the attachment is rejected, you must enter a rejection reason within the Rejection Reason field.

  • Is Grand Jury: Click the Is Grand Jury checkbox if the attachment is grand jury related.

  • Is Sensitive/ExParte: Select the Is Sensitive/ExParte checkbox if the attachment is sensitive/ExParte.

  • Potential Exhibit: Select the Potential Exhibit checkbox if the attachment is a potential exhibit.

3.7 Related Cases

The Related Cases tab allows you to manage all tasks related to the case and linked folders. Its task management workspaces include Tasks Assigned to Me, All Activities and Linked Folders. All potential tasks can be viewed and managed within this tab. Converted cases and other linked case are available within the Linked Folders option.

The Tasks Assigned to Me subsection is only available to users who have ongoing tasks assigned to them, otherwise this subsection does not appear. You can Delegate a task within this tab. You cannot use the Complete or the Complete & Assign buttons to progress the case through the workflow; instead, they must use the Approvals tab.

3.7.1 Delegate Assigned Tasks

To delegate a task:

  1. Open the Investigation Case Folder and navigate to the Related Cases tab.  

  2. Within the Tasks Assigned to Me workspace, select the assigned task to delegate and click Delegate.

  1. The Delegate Task window appears. Select the Assignee Type from the drop-down list. Menu options include:  

    1. User: Select the user that the task is delegated to by clicking the search icon within the User field.

i. The View Availability button allows you to check the selected user’s availability according to that user’s calendar.

NOTE: Selecting any other value from the Assignee Type drop-down list prompts the page to refresh and display additional fields.

  1. Office Queue: Select the office to delegate the task to from the Office Queue field.

  2. Case Owner: The Case Owner field is static, and delegates the task back to the case owner if you are not the case owner.

  3. Previous Task Assignee: The Previous Task Assignee field is static, and delegates the task back to the previous task assignee.

  1. After selecting the Assignee Type and, if applicable, user or office, click Delegate. The pop-up window closes, the tab refreshes, and the task is assigned to the selected assignee.  

3.7.2 All Activities

The All Activities subsection displays a list of all possible activities, which are populated by the workflow template. Each task can be delegated to other users.  

You can click the Workflow Diagram(K) button to view a diagram depicting the current workflow:

The Workflow History(j) button displays task(s) that have been performed in any related cases. You can print this report.

3.7.3 Linked Folders

The Linked Folders subsection displays all cases linked to the current case.

The New Folders button allows you to create a new case linked to the current case. To create a new case:

  1. Click the New Case button. The Folder Type window appears.  

  2. Select a case type from the Case Type drop-down list.

  1. Click Create. The new case appears within the Linked Folders subsection.

The Link Folders button allows you to search the cases which link with the current case. To link a case:

  1. Click Link Folders. The Search Folders window appears.

  1. Enter any relevant search criteria in the available fields, including:  

    1. Case Number: Search cases by case number.

    2. Case Owner: Search all cases owned a user.

    3. Subject: Search all cases related to this subject.

    4. Case Status: Search all cases with the selected case status.

    5. Current Task Assigned To: Search cases which these cases’ Current Task Assigned To the following (Any, User, Group, Office, or Office Queue).

  2. Click Search. The system displays all relevant search results.

  3. Select a case from the search results and click Select. The two cases are now linked. You can take additional linked case actions by clicking the Linked Case Actions(r) drop-down list. Options include:

    1. Open Case

    2. Unlink Case

    3. Details Report

Tasks are color coded for quick reference:

Color

Description

Current Task

Next Task

Next Possible Task

3.8 Staff

The Staff tab allows authorized users to manage the users and groups who have access to a case. Additionally, authorized users can add a new user or group, or remove an existing user/group.

NOTE: If an additional user is added to the case via the Staff tab, any tasks assigned to any previous users with the same role are automatically reassigned to the new user.

3.8.1 Add User

To add a new user to the staff list:

  1. Open the case folder and navigate to the Staff tab.

  2. Click Add User. The Assign Role pop-up window appears.

  3. Select the user role from the Role drop-down list. The pop-up window refreshes to display additional fields.  

  4. Click the User lookup. The pop-up window refreshes to display a list of eligible users.  

  1. Click the checkbox next to the user name, and then click OK.  

  1. The pop-up window refreshes to display the selected user name in the User field. Click Add. The pop-up window closes, and the selected user now has access to the case and is visible within the Staff tab.

3.8.2 Add Group

To add a new group to the staff list:

  1. Open the case folder and navigate to the Staff tab. Click Add Group.

  1. The Assign Role window appears. Select the user role from the Role drop-down list.

  2. The pop-up window refreshes to display additional fields. Click the Group lookup icon.

  1. The pop-up window refreshes to display a list of eligible groups. Click the checkbox next to the group and then click OK.  

  1. Click Add. The pop-up window closes, the Staff tab refreshes, and the selected group now has access to the case and is visible within the Staff tab.

3.8.3 Remove User/Group

To remove a user/group:

  1. Open the case folder and navigate to the Staff tab.

  2. Select a user or group from the list within the Staff tab.  

  3. Click Remove. The screen refreshes and the selected user is removed from the Staff tab.

3.9 Significant Items

The Significant Items tab is used to document important events relating to the case. These events can include an arrest, search, trial, sentencing, etc. Follow the steps below to log an event under Significant Items:

  1. Open the case folder and navigate to the Significant Items tab.

  1. Any previously created Significant Items are listed on this tab, with the oldest item appearing on top by default. To log a new Significant Item, scroll to the bottom of the page and click Insert Record.

  1. The page refreshes to display a new set of fields for logging a Significant Item. Complete the required fields, highlighted in red, starting by selecting the Activity Date:

  1. Complete the Anticipated Activity and Case Background fields.

  2. Using the free text field, list all Joint Agencies.

  3. Use the Yes/No radio buttons to indicate if the case is HQ Dissemination Only, Press Release Anticipated, and OIG Quote Anticipated.

  4. Click Select Action Type.

  1. The page refreshes to display the Significant Items workspace. Click the checkbox adjacent any Activities, and then click Select.  

  1. After clicking Select, the page refreshes to display the Investigation case folder, and the selected Activities appear in the Action Type field.

  2. When all details are complete, click Insert Record to save the information.

  3. A pop-up window appears, indicating that the Record was successfully added to the case folder. Click Close.  

After the item is saved, buttons appear allowing you to (A) Submit the Significant Item for Approval, to (B) Remove the Significant Item, or (C) Update the Record.

After the Significant Item is saved, you can click Attachments to add attachments associated with this item. After upload, these attachments are managed within the Attachments tab.

3.10 Approvals

The Approvals tab displays all approval requests related to the case, including Case Approvals, Document Approvals and Other Items. For each action performed by an approver, an entry is added to the Comment Log.

  • The Case Approvals subsection allows authorized users to approve/disapprove a case.

  • The Document Approvals subsection allows authorized users to approve/disapprove documentation.  

  • The Assistance Request Approvals subsection allows authorized users to approve/disapprove requests assistance that have been assigned to other Investigations users.  

  • The Significant Approvals subsection allows authorized users to approve/disapprove significant approval requests.  

  • The Case Activity Approvals subsection allows authorized users to approve/disapprove Case Activity Approvals.  

  • The Other Items subsection allows authorized users to approve/disapprove miscellaneous requests within the case.

  • The Comment Log records a log of approvals/comments/disapprovals for a case.  

4 eCASE Reports

eCASE Investigation features a reporting tool that generates user-selected information about case folders that can be used to track information by date, time period, contact information, users working on folders, and task details under each folder. The Reports section is located within the Launch Pad, under the Reports drop-down arrow.

4.1 Application Reports

To run an application report:

  1. Click the Reports menu option within the Launch Pad. The page refreshes to display the Reports List.  

  1. Select a report from the Report Name list, then click Run Report.

  1. Select the Start Date and End Date for the report.  

NOTE: The Parameter fields you must select vary between reports.

  1. Click the Select Agent lookup. A pop-up window appears.

  2. Click the checkbox next to the user and then click OK.  

  1. Click Show Report. The page refreshes to display a list of investigations cases that match the search criteria.  

4.2 Folder Reports

To run a folder report:

  1. Open the case folder and click the Reports(y) drop-down list.  

  2. The drop-down list expands. Select the report. Options include:

    1. Case Summary Report

    2. Chron Log Report

    3. Complaints Case Summary Report

    4. Completed Course List Report

    5. Course Status Report

    6. Investigation Summary Report

    7. Investigation Case Summary Report

    8. Preliminary Case Summary Report

    9. Staff Report

    10. Techniques Report  

  3. A pop-up window appears, containing the report.

4.3 Report Designer (Administrators)

eCASE Investigations utilizes the eCASE Report Designer module for creating custom reports. See the eCASE Administrator and App Design Manual for step-by-step instructions on using the designer tool.

Related articles